AcuRite 00592TXR Replacement Sensor Guide

On this page (10 sections)

1. AcuRite model 00592TXR replacement sensor guide
2. Which model numbers match the AcuRite model 00592TXR replacement sensor?
3. How do you check display compatibility?
4. What should you consider before buying?
5. Where should you place the sensor?
6. How do you set up the replacement?
7. What common mistakes can prevent a good match?
8. Which AcuRite product fits your situation?
9. What if the replacement sensor does not pair?
10. How should you choose an AcuRite model 00592TXR replacement sensor?

AcuRite model 00592TXR replacement sensor guide

An AcuRite model 00592TXR replacement sensor may suit your setup if the number on your current sensor matches a supported identifier and your display is compatible. Check both before you buy, because similar-looking sensors can belong to different product families.

The sensor to consider is the AcuRite Wireless Indoor Outdoor Temperature and Humidity Sensor with A-B-C Switch, identified as 06002M / 592TXR. Its supported old sensor identifiers include 00592TX, 00592TXR, 06002M, 06002RM and 11126-592TXR.

The most useful first step is to read the label on the back of the sensor you plan to replace. Then find your display’s model number and verify the pairing before ordering.

That two-part check can help you avoid buying a sensor that matches the old label but does not suit your display.

Which model numbers match the AcuRite model 00592TXR replacement sensor?

The replacement’s compatibility information includes 00592TX, 00592TXR, 06002M, 06002RM and 11126-592TXR as old sensor identifiers. Read the full number printed on your current sensor, including any letters at the end.

The replacement’s name combines several identifiers: AcuRite Wireless Indoor Outdoor Temperature and Humidity Sensor with A-B-C Switch, 06002M / 592TXR. Names and numbers can differ between sensor families, so compare the label rather than judging by appearance.

For a different brand’s replacement sensor, see the La Crosse TX141TH-BV4 compatibility guide.

A close match in name is a starting point, not a full compatibility check. Confirm that the display model supports the replacement as well.

If you cannot find an answer in your display’s instructions or product information, contact AcuRite consumer support before ordering.

How to verify an AcuRite 00592TXR replacement sensor match

Use the sensor’s complete model number to decide whether the replacement is worth considering. The supported identifiers are specific, so a number that looks close but is not on the list needs confirmation.

1. Find the label on the back of the sensor you are replacing.
2. Write down the full model number, including its letters and digits.
3. Compare it with the supported identifiers: 00592TX, 00592TXR, 06002M, 06002RM or 11126-592TXR.
4. Find the model number for your display.
5. Confirm that the display supports the replacement, using its instructions or AcuRite support.

Keep a note or photo of both labels while you check. It is easy to confuse similar model numbers when one character differs, especially when sensor and display numbers are printed in different places.

If the number on your sensor is missing or unreadable, do not choose based on the shape alone. Contact AcuRite with the display model and any remaining label details so you can check the right sensor family.

How do you check display compatibility?

The display must support the replacement sensor for the pair to work as intended. See the AcuRite Iris sensor compatibility guide for a different AcuRite sensor family.

A matching number on the old sensor does not, by itself, confirm compatibility with every AcuRite display.

Look for the display model on its back, in its setup instructions or in its product information. Compare the display model with guidance for the replacement.

If the guidance does not clearly cover your display, ask AcuRite consumer support to confirm the pairing.

The replacement has an A-B-C switch. Set the switch according to your display’s instructions, since the correct channel or code depends on the setup guidance for that display.

Avoid changing several settings at once. Make one change, then follow the pairing steps so you can tell what resolved a connection problem.

A display may need a particular pairing sequence after batteries are installed or a channel is changed. Use the steps for your specific display rather than assuming every model follows the same process.

Keep the instructions nearby during setup.

If your sensor has stopped reporting, check connection and setup issues before buying another one. For related symptoms, see weather thermometer failure guide.

The AcuRite 00592TXR troubleshooting guide can help you work through that question.

What should you consider before buying?

Buy the replacement when both compatibility checks pass and you want a remote temperature and humidity sensor for a supported AcuRite setup. The replacement requires 2 AA alkaline or lithium batteries, which are not included.

The sensor can pair with a variety of compatible AcuRite indoor digital weather stations, sold separately. If you mainly want to track indoor humidity, compare digital hygrometers for home.

It can also be used with AcuRite Access for remote monitoring; Access is sold separately. For app-connected alternatives, compare WiFi temperature and humidity sensors.

Choose it when you already have a compatible display or Access setup and need the sensor itself.

The sensor has a stated measurement accuracy of ±2°F. Use that figure as a reference when comparing a reading with another thermometer.

Place the two instruments close together and give them time to settle before deciding that a small difference means the sensor has failed.

The sensor is designed for indoor or outdoor monitoring. To compare standalone options, see indoor outdoor thermometers.

Its integrated hole allows you to mount it with a nail or hang it in a suitable location.

Choose a spot that supports the kind of reading you need. A sunny or poorly ventilated position may not reflect general outdoor conditions.

Check the battery type before you start. The replacement can use AA alkaline or lithium batteries, but the batteries are not included.

Where should you place the sensor?

Choose a location that reflects the conditions you want to monitor. For outdoor air temperature, a shaded, ventilated spot is generally more useful than a place exposed to direct sun or heat from a wall, roof or vent.

For indoor readings, place the sensor where air can move around it and where it is not warmed by a heater, appliance or direct sunlight. A sensor tucked behind furniture or close to a window may show conditions that differ from the rest of the room.

Mount the sensor securely using its integrated hole and a suitable nail or hanging point. Pick a position that is easy to reach for battery changes, but not where it could be knocked down or exposed to water collecting on a surface.

Give a newly placed sensor time to adjust to its location before judging the reading. Moving it between indoors and outdoors, or from a warm room to a cooler one, can leave the sensor responding to its previous surroundings for a short period.

If you are comparing it with another thermometer, keep both instruments in the same general area. A comparison is less useful when one is in sunlight and the other is in shade, or when one is next to a warm wall.

How do you set up the replacement?

Start with compatible equipment, fresh batteries and the instructions for your display. Follow the display’s pairing process, and use the replacement’s A-B-C switch as directed by those instructions.

Before setup, confirm the sensor model and display model one more time. Insert 2 AA alkaline or lithium batteries, then use the display’s instructions to select the channel or switch position and begin pairing.

Keep the sensor near the display during this process if the instructions call for it.

Wait for the display to show the sensor’s reading before mounting it in its final location. If it does not connect, check battery orientation, the switch position and the pairing sequence.

Avoid repeatedly changing the channel without checking the instructions, since that can make it harder to identify the cause.

After a successful connection, move the sensor to its chosen location and check that readings continue to appear. If the display stops receiving data, bring the sensor closer and repeat the troubleshooting steps in the manual.

The intended location may affect reception, so confirm the connection before settling on a mounting spot.

What common mistakes can prevent a good match?

The most common buying mistake is relying only on a familiar product name or a similar case shape. Read the old sensor’s full model number, then check the display’s compatibility separately.

Another mistake is ordering before checking the display model. A supported old sensor number is useful, but the display still needs to support the replacement.

Ask AcuRite if you cannot verify that part.

A third mistake is expecting batteries to come in the package. The replacement needs 2 AA alkaline or lithium batteries, and they are not included.

Have the correct batteries ready before beginning setup so a low or missing battery does not look like a pairing fault.

Placement can also lead to a misleading reading. Direct sun, nearby heat sources, blocked airflow and a sheltered spot that differs from the conditions you want to measure can all affect what the sensor detects.

Choose the position based on the reading you want, and compare it with another thermometer in the same conditions if something seems unusual.

Finally, do not treat every odd reading as proof that the sensor needs replacing. Check its location, batteries and connection first.

A persistent difference may call for a closer look at how to assess weather station accuracy or what sensor drift means.

Which AcuRite product fits your situation?

Choose the replacement sensor for an existing compatible display or AcuRite Access setup when the old sensor number matches. The other two products below are separate instruments for different needs, rather than automatic substitutes for a remote sensor.

The indoor monitor suits someone who wants room temperature and humidity on a local display. It is not a replacement sensor for an outdoor setup.

The 06002M / 592TXR is the direct option to investigate when the old sensor identifier and display both match. It measures indoor or outdoor temperature and humidity and requires 2 AA alkaline or lithium batteries.

The 00424CA is a separate indoor-outdoor thermometer system with its own display and remote sensor. Choose it if you want a standalone temperature setup rather than a replacement for your current sensor.

If your old sensor belongs to another family, compare it with the AcuRite 00606TXA1 replacement sensor guide. A different number calls for a separate compatibility check.

What if the replacement sensor does not pair?

Check the display model, battery installation, A-B-C switch position and pairing sequence before assuming the replacement is faulty. Follow the instructions for your exact display, since setup steps can vary.

Start by confirming that the batteries are installed in the correct direction and that they are the required AA type. Then check that the switch position matches the display’s setup instructions.

Keep the sensor near the display while pairing if the manual recommends that approach.

If it still does not connect, restart the process using the steps in the display manual. Confirm that you are pairing the intended sensor and that the display supports it.

If compatibility remains uncertain, AcuRite consumer support can help check the sensor and display model numbers.

When a connection appears but a reading seems wrong, compare it with a separate thermometer nearby. Make sure both instruments are in similar conditions, then allow time for the readings to settle.

A persistent mismatch can point toward placement, drift or a compatibility issue, so check those possibilities before replacing another part.

How should you choose an AcuRite model 00592TXR replacement sensor?

Choose the AcuRite model 00592TXR replacement sensor when your old sensor’s full model number appears in its supported identifiers and your display is confirmed compatible. If either check is unclear, verify the pairing with AcuRite before you order.

Choose the indoor thermometer and hygrometer when you need a room display for temperature and humidity. Choose the 00424CA when you want a separate indoor-outdoor thermometer system with its own display and remote sensor.

Neither choice should be treated as a direct replacement without confirming that it fits your setup.

If your current sensor is not reporting, work through the 00592TXR connection and setup checks first. If the label points to another sensor family, use the 00606TXA1 compatibility guide to check that model separately.

Frequently asked questions

Which model numbers match the AcuRite 00592TXR replacement sensor?

The supported old sensor identifiers are 00592TX, 00592TXR, 06002M, 06002RM and 11126-592TXR. Read the complete number on your current sensor, then confirm that your display supports the replacement before ordering.

Is 06002M the same replacement as 00592TXR?

The sensor is identified as 06002M / 592TXR, and its compatibility information includes 00592TXR and 06002M among the old sensor numbers it may replace. Match your sensor’s label and verify your display’s compatibility, since the sensor number alone does not confirm the full setup.

Can I use an AcuRite 00592TXR sensor with any AcuRite display?

No. Check the display model before buying.

A matching number on the old sensor is only one part of the compatibility check, so confirm that the display supports the replacement.

Contact AcuRite consumer support if you cannot verify the pairing.

What should I check before ordering an AcuRite replacement sensor?

Read the complete model number on the back of the sensor you are replacing and compare it with the supported identifiers. Confirm that your display is compatible, then note that the replacement needs 2 AA alkaline or lithium batteries, which are not included.

Should I replace the sensor if its readings seem wrong?

First check placement, batteries and the display connection. Compare the reading with a separate thermometer in the same location.

If the difference continues, review sensor drift and display compatibility before deciding whether a replacement is the right next step.