Guide

How to Install a Radon Mitigation System

Updated on · By the AcuRite Weather Station team

A radon mitigation system usually draws soil gas from below the foundation through a sealed pipe and fan, then vents it outdoors above the roofline. Have a qualified professional assess the home and confirm the result with a follow-up radon test.

On this page (10 sections)
  1. What does a radon mitigation system installation involve?
  2. What should you choose before installation?
  3. What equipment does a typical system need?
  4. How does a radon mitigation system get installed?
  5. Who should hire a qualified radon installer?
  6. Can you install a radon mitigation system yourself?
  7. Which radon monitors can help after installation?
  8. What mistakes can keep a system from working well?
  9. How do you care for a radon mitigation system?
  10. How do you decide how to install a radon mitigation system?

A radon mitigation system usually draws soil gas from below the foundation through a sealed pipe and fan, then vents it outdoors above the roofline. If you're researching how to install a radon mitigation system, start with a radon test and a professional foundation assessment; the right layout depends on the house.

Installation typically involves choosing a suction point, creating an opening, routing and sealing vent pipe, placing a fan, and checking the result with another radon test. The system design changes with the foundation, soil, and available pipe route.

What does a radon mitigation system installation involve?

A common active sub-slab system pulls soil gas from beneath a concrete floor and sends it through a fan and vent pipe. The goal is to give soil gas a path outdoors so less enters the home.

A professional assesses the foundation, selects a collection point, and plans a sealed pipe route to an outdoor discharge. Radon mitigation systems explained describes common designs and how they move soil gas.

A basement slab is only one situation. Crawlspaces, dirt floors, sumps, and unusual foundations can call for other methods, so discuss radon mitigation system options with a qualified professional before choosing equipment.

What should you choose before installation?

Choose the system based on the foundation and a qualified assessment, not on a generic kit or fan alone. Your starting radon result and the home's construction help determine whether mitigation is needed and what design is suitable.

Ask the professional to inspect the slab, foundation walls, floor joints, drains, sump, and any crawlspace. These features affect where the suction point belongs, what needs sealing, and how the pipe can reach outdoors.

If you are deciding what to do after a high result, read how to mitigate radon in a basement. An air quality monitor can help you compare monitoring options, but use an appropriate radon test and follow its instructions for before-and-after measurements.

For a dirt-floor basement, the collection method may use a membrane and a sub-membrane system. Don't assume a slab system fits; see radon mitigation for a dirt floor basement and ask a professional which design suits that foundation.

What equipment does a typical system need?

An active sub-slab system commonly uses a suction point, PVC vent pipe, radon fan, electrical supply, seals, pipe supports, and a pressure indicator. The installer should size and place those parts for the home.

The suction point may be a core-drilled opening with a collection area below the slab. The fan draws soil gas into the pipe, while sealed joints and foundation openings help limit leaks.

The fan and discharge route matter as much as the individual parts. The fan is generally kept outside occupied space, and the exhaust is routed outdoors above the roofline where it is less likely to re-enter through a window, door, or air intake.

How does a radon mitigation system get installed?

A typical installation moves from assessment to suction-point work, pipe and fan installation, sealing, and a follow-up radon test. Before work starts, ask the installer to walk you through the planned route and checks.

How is the suction point chosen for radon mitigation?

The suction point for a radon mitigation system is chosen to collect soil gas beneath the foundation. Its location and construction depend on the foundation and soil.

The installer may drill through the concrete and remove soil to create a small collection area. Ask how the location was selected and whether utilities or embedded materials could affect drilling.

How are the radon pipe and fan set up?

The pipe connects the suction point to a fan and carries soil gas to an outdoor discharge. The installer supports the pipe and seals joints and penetrations as part of the system design.

The fan should be placed where a leak will not send radon into living space. The pipe route also needs a suitable discharge point above the roofline, away from openings where exhaust could return indoors.

How is performance checked after installation?

A follow-up radon test checks the indoor level after installation. A pressure indicator helps show system operation, but it does not measure the home's radon concentration.

The installer should check that the fan runs and the pressure indicator responds as expected. Keep the operating instructions, system layout, and follow-up test result with the home's records.

Who should hire a qualified radon installer?

Hire a qualified professional to design the system and handle work beyond your skills, especially concrete coring, electrical connections, or roof-level exhaust routing. Local requirements may also call for permits or specific practices.

Ask about the installer's training or certification, what the quote includes, and how the result will be checked. Request a clear pipe and fan layout, operating instructions, and documentation of the post-installation radon test.

A professional assessment is particularly useful when the home has a crawlspace or dirt floor, an unusual foundation, or a pipe route that passes through finished spaces. A basic sub-slab layout may not suit those conditions.

Can you install a radon mitigation system yourself?

A simple system may be within reach for some homeowners, but the design, drilling, sealed pipework, electrical work, and follow-up measurement all need to be handled correctly. If you lack the tools or skills for any step, hire a qualified installer.

Before starting, check local permit requirements and get the foundation assessed. Don't select a fan or drill a suction point based only on a generic diagram; soil and house layout affect the system design.

DIY work also needs a plan for checking the system later. Learn what the pressure indicator should show, how to spot a stopped fan, and when to arrange another radon test.

Which radon monitors can help after installation?

A radon monitor can help you track readings after installation, while the required follow-up test should follow the professional's method and timing. Keep the device in a consistent location when comparing readings over time.

The Airthings Corentium Home Radon Detector runs on 3 AAA batteries and displays short- and long-term readings. Its portable format suits someone who wants on-screen radon results without needing an outlet.

The Airthings Wave Plus measures radon, carbon dioxide, VOCs, humidity, temperature, and air pressure. It gives a color-coded visual indication and can connect by Bluetooth to the Airthings app for detailed results.

The Wave Plus suits a household that wants radon readings alongside several indoor air measurements. Skip it if you only need an on-screen radon monitor; the Corentium Home is more focused on that task.

The easy@Home kit contains ovulation and pregnancy test strips, so it has no role in radon mitigation or radon monitoring. It is not a substitute for a radon test or detector.

What mistakes can keep a system from working well?

A system can underperform when the suction area, fan, or pipe route does not fit the home, or when foundation openings and pipe joints leak. A stopped fan, blocked pipe, or basement remodel can also affect operation.

Don't judge performance by sound alone. Check the pressure indicator against the expected operating range and use a radon test to measure the indoor level.

Tell the installer before remodeling the basement or changing floor openings. A new sump cover, finished floor, or added room can change how the system draws air, so ask whether the layout needs adjustment.

How do you care for a radon mitigation system?

Check that the fan is running, watch the pressure indicator, keep the exhaust route clear, and retest as advised. Ongoing checks help you catch a problem after the initial result.

Don't disconnect the fan or block the pipe to reduce noise. If the fan stops or the pressure indicator changes, contact the installer and arrange radon testing while repairs are planned.

Use this guide to radon mitigation system maintenance for routine checks and signs that the system needs service.

How do you decide how to install a radon mitigation system?

Choose a qualified installer when the foundation is complex or the work involves coring, electrical connections, or a roof-level exhaust route. For a straightforward slab, still begin with an assessment and finish with a follow-up radon test.

For ongoing monitoring, choose the Corentium Home if you want short- and long-term radon readings on the device. Choose the Wave Plus if you also want readings for five other indoor air factors.

Skip both if you need a professional test result rather than a monitor. Start with the foundation and test result, then let those needs guide how to install a radon mitigation system in your home.

Frequently asked questions

Can I install a radon mitigation system myself?

Some handy homeowners may be able to complete parts of a simple sub-slab system, but drilling concrete, electrical work, roof penetrations, and confirming performance can require professional skills or permits. Ask a qualified radon professional to assess the home and handle work beyond your training, especially if the system needs a crawlspace or complex pipe route.

What equipment is needed for a radon mitigation system?

A typical active sub-slab system uses a suction point, PVC vent pipe, a radon fan, electrical power, pipe supports, sealant, and a manometer or other pressure indicator. The right fan, pipe size, suction point location, and exhaust route depend on the foundation and soil, so a professional should specify them.

Where should a radon mitigation fan be installed?

A mitigation fan is commonly installed outside the occupied space, such as in an attic or on the exterior, with the exhaust routed above the roofline. The exact placement depends on the system design and local requirements; a qualified installer should keep the fan and joints from leaking radon into living areas.

How do I know if a radon mitigation system is working?

Check that the system is powered and its pressure indicator shows the expected suction, then test the home's radon level after installation. A pressure reading alone does not confirm the indoor level is low; use an appropriate radon test and follow the professional's timing and placement instructions.